SHOP DRAWING
Aluminium Shop-front Doors + Automatic Sliding Entrances
Client: — • Ref: BC-QTN-2026-027 • Drawing SD-01A. 3D MODEL — Front entrance (C) · Back entrance (B)
SENSOR: idle
drag to rotate • scroll/pinch to zoom • double-tap to auto-spin
Glass Specification
10 mm clear temperedMonolithic safety glass · EN 12150 · polished edges
Glass thickness is not stated on the client drawing — to be confirmed against the leaf glazing pocket (44 mm leaf depth).
Panels12 pcs
Net glass24.00 m²
Edge length76.00 m.l.
Weight ≈600 kg
Aluminium Profiles (from client drawing)
| Member | Type B (back entrance) | Type C (automatic) |
|---|---|---|
| Header beam | — | 200×165×3.5 |
| Outer frame | 50×100×1.4 | 60×165×2.0 |
| Leaf stile | 50×44×2.0 | 80×44×2.0 |
| Top/bottom rail | 90×44×2.0 | 90×44×2.0 |
Face width × depth × wall thickness, mm.
Unit Summary — 2 openings
| Type | Size (mm) | Qty | Priced m² | Net glass |
|---|---|---|---|---|
| B back entrance | 6200 × 2500 | 1 | 15.50 | 12.03 |
| C automatic | 6200 × 2500 | 1 | 15.50 | 11.97 |
| TOTAL (m²) | 2 | 31.00 | 24.00 | |
Type B: same layout as the front, manual — 2 × 900 side swing doors + 2 fixed 1050 + 2000 double swing door (2 × 1000) in the middle, 2500 high.
Type C: 2 × 900 swing doors + 2 fixed + 2 sliding leaves (1080 each), doors 2500 high under a 200 beam — 2000 mm clear opening, operator & sensor in the 200 mm header beam.
Type C: 2 × 900 swing doors + 2 fixed + 2 sliding leaves (1080 each), doors 2500 high under a 200 beam — 2000 mm clear opening, operator & sensor in the 200 mm header beam.
BlueCrest Glass — Architectural Glass & Facades
SD-01 · Sheet 1 of 3
B. TYPE B — BACK ENTRANCE ELEVATION (×1)
NTS · mm
D. TYPE C — AUTOMATIC ENTRANCE ELEVATION (×1)
NTS · mm
E. TYPE C — PLAN (open position shown dashed · swing doors open inward)
NTS · mm
F. LEGEND
Clear tempered glass
Aluminium frame / leaf profile
Swing leaf — apex points to hinge side
Motorised sliding leaf (direction)
Fixed glazed panel
Glass cut size in mm (width × height) — e.g. 920×2320
G. TYPE B — BACK ENTRANCE
6200 × 2500 — same size & area as the front (15.50 m²).Same layout as the front, without the automatic operator: 2000 double swing door (2 × 1000 leaves) in the middle · 2 fixed panels (1050 each) · 2 side swing doors (900 each). All leaves on floor springs, opening inward, with a long vertical pull handle.
Frame & mullions 50×100×1.4 · leaf 50×44×2.0 · rails 90×44×2.0.
H. TYPE C — AUTOMATION
RECORD (Switzerland) operator (motor, belt drive, controller) concealed in the 200×165 header beam.Microwave motion sensor + safety presence beams on both faces open the two centre leaves to a 2000 mm clear opening and close them after a set hold-open time.
Side 900 swing doors (opening inward) serve as manual / emergency exits.
J. SITE NOTES
• All sizes are overall frame sizes in mm, taken from the client drawing.• Glass sizes are net estimates — final cut sizes after profile shop-detailing.
• Re-measure every opening on site before fabrication.
• Aluminium finish and glass thickness to be confirmed.
BlueCrest Glass — Architectural Glass & Facades
SD-01 · Sheet 2 of 3
Glass Cutting List — 12 pcs · 10 mm clear tempered
| # | Type | Position | Glass W × H (mm) | Pcs / unit | Units | Total pcs | Area each (m²) | Area total (m²) | Edge (m.l.) |
|---|---|---|---|---|---|---|---|---|---|
| 1 | B back entrance | Side swing doors (L + R) | 800 × 2270 | 2 | 1 | 2 | 1.816 | 3.63 | 12.28 |
| 2 | B back entrance | Fixed panels (L + R) | 950 × 2270 | 2 | 1 | 2 | 2.157 | 4.31 | 12.88 |
| 3 | B back entrance | Middle double-door leaves | 900 × 2270 | 2 | 1 | 2 | 2.043 | 4.09 | 12.68 |
| 4 | C automatic | Side swing doors (L + R) | 740 × 2320 | 2 | 1 | 2 | 1.717 | 3.43 | 12.24 |
| 5 | C automatic | Fixed side panels (L + R) | 920 × 2320 | 2 | 1 | 2 | 2.134 | 4.27 | 12.96 |
| 6 | C automatic | Motorised sliding leaves (L + R) | 920 × 2320 | 2 | 1 | 2 | 2.134 | 4.27 | 12.96 |
| TOTAL GLASS | 12 | 24.00 | 76.00 | ||||||
Net glass = leaf size − 2 × stile − 2 × rail (B: stile 50, rail 90, leaves 2450 under a 50 head frame · C: stile 80, rail 90, leaves full 2500 height). Glazing bite not included.
Priced Areas
| Type | W × H (mm) | m² / unit | Units | Total m² |
|---|---|---|---|---|
| B — back entrance (double door + 2 fixed + 2 side doors) | 6200 × 2500 | 15.50 | 1 | 15.50 |
| C — automatic entrance (glazed 2500, beam excluded) | 6200 × 2500 | 15.50 | 1 | 15.50 |
| TOTAL | 2 | 31.00 | ||
Hardware per unit
| Type | Hardware |
|---|---|
| B | 4 floor springs + top pivots · 4 long pull handles (≈1700) · 3 locks · 2 flush bolts (middle double door) |
| C | Automatic sliding operator (2-leaf) · 2 motion/presence sensors · controller & key switch · floor guides · 2 floor springs · 2 pull handles (1990) |
Notes & Specifications
• Scope: 1 front automatic sliding entrance (Type C) + 1 back entrance (Type B: same layout as the front without automation — 2000 double door in the middle, 2 fixed, 2 side doors; 15.50 m²).• Glass: 10 mm clear tempered safety glass to EN 12150, polished edges — 12 panels / 24.00 m² net. Thickness to be confirmed against the 44 mm leaf glazing pocket.
• Type C: header beam 200×165×3.5 houses the operator; two centre leaves slide apart to a 2000 mm clear opening on sensor signal; fixed side panels behind; 900 swing doors each side.
• All dimensions in mm, overall frame sizes. Re-measure on site before fabrication; glass cut sizes are final only after shop detailing.
• Aluminium colour / finish to be confirmed by the client (shown dark grey).
BlueCrest GlassCairo, Egypt
Project
Shop-front & Auto Doors
Client
—
Drawing No.
SD-01
Reference
BC-QTN-2026-027
Date
21 / 10 / 2026
Scale
NTS
Rev.
2
Units
mm
BlueCrest Glass — bluecresttr.com • sales@bluecresttr.com • +20 100 013 3391
SD-01 · Sheet 3 of 3